Accessories
Measuring Instruments
CR-400 / 410
Chroma Meter
Highly accurate, multi-functional, and user-friendly, Konica Minolta's new Chroma Meters CR-400 and CR-410 provide support for measurement using just the measuring head.
Accessories
Optional accessories for CR-400 / 410
Granular Attachment CR-A50
For measurements of powders, pastes, grains or other small sized granular material. The low reflectance glass plate protects the sample surface against disorientation and prevents specimen material to enter the instrument. The set includes one retaining ring each to adjust the measuring area accordingly to either CR-400 or CR-410.
- Item Order Code: 1829-751
Glass Plate for CR-A50, CR-A51
Replacement low reflectance glass plate for CR-A50 Granular Attachment.
- Item Order Code: 1829-752
Retaining Ring Set CR-A52
Replacement ring set for CR-A50 Granular Attachment. The set consist of one ring each for CR-400 and CR-410.
- Item Order Code: 1829-753
Light Protection Tube with glass protection plate CR-A33a (only for CR-400)
Light projection tube for measurement of pasty, wet or moist samples. The convex protection glass plate prevents specimen from entering the instrument. The CR-A33a is recommended for soft specimen. The diameter of the plate is 22 mm.
- Item Order Code: 1849-731
Light Protection Tube with plate 40 mm CR-A33b (only for CR-400)
Standard light projection tube with 40 mm plastic disc. Provides high stability on the sample. Recommended for all standard applications.
- Order Item Code: 1849-732
Light Protection Tube without plate CR-A33c (only for CR-400)
Light projection tube without plate for measurements on small samples where the 40 mm or 22 mm plate is too large.
- Item Order Code: 1849-733
Light Protection Tube with plate 22 mm CR-A33d (only for CR-400)
Light projection tube with a plate of 22 mm diameter. Allows measurements on small specimen with high stability against tilting of the measuring head.
- Item Order Code: 1849-734
Light Protection Tube with Glass Protection CR-A33f (only for CR-400)
Light projection tube for measurement of soft samples. The concave protection glass plate prevents specimen from entering the instrument. The CR-A33a is recommended for flattening soft or soft and wet specimen. The diameter of the plate is 22 mm diameter.
- Item Order Code: 1849-736
Pivoting Base CR-A12 (only for CR-400)
Recommended for the measurement of flat samples. The large base plate increases the stability and the clear marked target area provides a precise positioning. The CR-A12 Pivoting Base set includes the Light Protection Tube CR-A33c (without plate).
- Item Order Code: 1849-741
Hard Case (only for CR-400)
For comfortable hand carrying and storage of measuring head, data processor and accessories.
- Item Order Code: 1878-600
Data Cable CR-A102 RS232c
Connection cable between measuring head or data processor and PC. For PC terminals with 9 pin SUB-D connecter. Length of the cable 2 m.
- Item Order Code: 1878-704
Cell Holder CR-A503 (only for CR-400)
For measurements of powders, paste and grains in combination with the Glass Cell CR-A504. The measuring head is set to up-side down position and the Cell Holder CR-A503 precisely fixes the position of the Glass Cell CR-504. To secure the instrument in a safe position against tipping the Vertical Stand USD CM-A516 is recommended.
- Item Order Code: 9970-1003
Glass Cell CR-A504 (only for CR-400)
Glass Cell made of optical glass for measurements of powders, pastes, grains and small granular materials. Diameter of the cell 34 mm. For precise positioning the Cell Holder CR-A503 is recommended.
- Item Order Code: 9970-2504
Sample Holder CR-A505 (only for CR-400)
Base holder to set the measuring head in horizontal position. Allows in combination with the Specimen Holder CM-A96 measurements of small samples up to a thickness of 22.5 mm or with the Glass- or Disposal Cells with 10 or 20 mm optical path the measurement of opaque liquids.
- Item Order Code: 9970-441
Transmittance Specimen Holder CM-A96 (only for CR-400)
Required to fix opaque samples or the Glass or Disposal cells for measurement of opaque liquids in combination with the Sample Holder CR-A505. The clamp provides a constant pressure to the sample and the moveable side holders keep the cells in correct position.
- Item Order Code: 1864-708
Glass Cell 10 mm CM-A98 (only for CR-400)
Glass Cell made of optical glass with an optical path of 10 mm. Recommended for precise reflectance measurements of opaque liquids in combination with Sample Holder CR-A505 and Specimen Holder CM-A96.
- Item Order Code: 1864-710
Glass Cell 20 mm CM-A99 (only for CR-400)
Glass Cell with made of optical glass with an optical path of 20 mm. Suitable for precise reflectance measurements of opaque liquids with lower density in combination with Sample Holder CR-A505 and Specimen Holder CM-A96.
- Item Order Code: 1864-711
Plastic Cell 10 mm CM-A131 (only for CR-400)
Disposal plastic cell with an optical path of 10 mm. Suitable for reflectance measurements of water based opaque liquids in combination with Sample Holder CR-A505 and Specimen Holder CM-A96.
- Item Order Code: 1870-716
Plastic Cell 20 mm CM-A132 (only for CR-400)
Disposal plastic cell with an optical path of 20 mm. Suitable for reflectance measurements of water based opaque liquids with lower density or opaque paste in combination with Sample Holder CR-A505 and Specimen Holder CM-A96.
- Item Order Code: 1870-717
Shoulder Case CR/CM (for CR-400 Head and CR-410 Head)
Small, compact and comfortable softcase for measuring head, white calibration tile and other small accessories.
- Item Order Code: 9971-0406
Flow Cell CM-A508 (only for CR-400)
For continuous measurements of opaque liquids in reflectance mode. The optical path of the cell is 10 mm and the max. pressure is up to 2 Bar. For the positioning of the Flow Cell CM-A508 the horizontal aligned Sample Holder CR-A505 and the Sample Holder CM-A96 are required.
- Item Order Code: 9970-237
Shoulder Case CR
The shoulder case increases the movability for field measurement. The DP-400 can be operated through the transparent Vinyl cover, a slit for the paper allows print out of the measurement data without taking off the case. An integrated holster keeps the measuring head always ready for measurement and the calibration tile can be stored safely in a small bag at the side.
- Item Order Code: 9999-905
Light Protection Tube with Glass Protection CR-A33e (only for CR-410)
Light projection tube for measurement of pasty, wet or moist samples. Also suitable to measure grains or granular specimen in bags. The protection glass plate prevents specimen from entering the instrument.
- Item Order Code: 1849-735
Hard Case CR-A103 (only for CR-410)
For comfortable hand carrying and storage of measuring head, data processor and accessories.
- Item Order Code: 1878-600
Cell Holder CR-A501 (only for CR-410)
For measurements of powders, grains and granular materials in combination with the Glass Cell CR-A504. The measuring head is set to up-side down position and the Cell Holder CR-A501 precisely fixes the position of the Glass Cell CR-502.
- Item Order Code: 9970-219
Glass Cell CR-A502 (only for CR-410)
Glass Cell made of optical glass for measurements of powders, grains and granular materials. Diameter of the cell 50 mm. For positioning the Cell Holder CR-A503 is required.
- Item Order Code: 9970-220
Vertical Stand USD CM-A516
The CM-A516 Vertical allows to align the instrument in Up-Side-Down position and secures that the instrument cannot get out of balance by using the Cell-Holder CR-A503 for CR-400 and CR-A501 for CR-410.
- Available Spring 2008
Related Software
