Specifications
Measuring Instruments
BC-10
Specifications
Principal Specifications BC-10
| Illumination / Viewing geometry | 8°:di (8° illumination angle / diffuse viewing, sepular component included SCI) |
|---|---|
| Receptors | 6 silicon photocells (3 for measurement, 3 to control illumination) filtered to detect primary stimulus values for red, green and blue |
| Light source | Special halogen lamp for D65 |
| Measuring area | Ø 8 mm |
| Display modes | 0.01 - 5.25 BCU (Baking Contrast Units); CIE L*a*b* |
| Observer condition | CIE: 10° Standard Observer |
| Illuminant condition | CIE : Standard Illuminant D65 |
| Statistics | Minimum, Maximum and Mean values of up to 16 measurement |
| Repeatability | ΔE*ab 0.1 (standard deviation) |
| Measurement conditions: Average of measurements on standard white plate | |
| Min. meas. interval | Approx. 1 sec |
| Power source | 4 AA-size batteries or optional AC Adapter AC-A308 |
| Battery life | Alkaline-manganese batteries: Approx. 2000 measurements at 10 sec. interval |
| Ni-Cd batteries: Approx. 600 measurements at 10 sec. interval | |
| Operating range | Temperature: 0 - 40°C |
| Humidity: 85% or less (at 35°C) without condensation | |
| Weight / Dimensions (W x H x D) | 360 g without batteries; 59 x 158 x 85 mm |
| Standard accessories | Soft Case CR-A68; Protective Cap with white calibration plate CR-A72; Wrist Strap CR-A73; 4 AA-size batteries |
| Optional accessories | Printer Cable CR-A75; Thermo-Printer DPU-H245HS, AC Adapter AC-A308 |
Specifications are subject to change without prior notice.
